Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
USB ntkern.vxd
Name: alex Date: December 27, 1999 at 00:28:50 Pacific
Comment:
I recently enabled my usb ports in win 98. Win 98 found the hardware and installed the software for it. After this happened there were 2 entries under the USB section of the system device manger. One is "Inter(r) 82371SB PCI to USB Universal Host Controller." That works fine. The other is called "USB Root Hub", but it has a yellow exclamation point on it. And when I view the properties of this entry it says "The NTKERN.VXD device loader(s) for this device could not load the device driver. (Code 2.) What should I do to fix this. thanks.
Name: norton seron Date: December 27, 1999 at 05:52:14 Pacific
Reply:
find and install the IDE Bus Master for your mother board, try the manufacturers site
0
Response Number 2
Name: rg Date: December 28, 1999 at 15:15:47 Pacific
Reply:
I've got a similar setup to you, but I don't have a file called ntkern.vxd on my system.
Have you accidentally installed the NT version instead of Win98?
0
Response Number 3
Name: The Toonces Date: December 28, 1999 at 16:58:30 Pacific
Reply:
try using the System file checker (sfc.exe) to restore the file.
0
Response Number 4
Name: Dan Hurst Date: December 29, 1999 at 17:30:57 Pacific
Reply:
See post at www.surfusa.com/wwwboard/messages/9402.html "I had the same problem,remove APM from device manager and it all works without a hitch" DS Nottm/UK I verify this fix. No more problems with USB after APM removed.
0
Response Number 5
Name: Dan Hurst Date: January 13, 2000 at 08:12:26 Pacific
Reply:
New fix for my system. In BIOS-I enabled USB legacy keyboard support and disabled System inactivity timeout(was set to 30 min.) In Control Panel-I changed Compaq APM to low, Allows Windows Time-outs. I reinstalled APM but did not keep VPOWER.VXD 4.10.2223. VPOWER.VXD file version is 4.10.2222.(This is a driver for APM.) System appears to be as stable as with deleting APM. I have not tested system for critical step. Reference for Intel motherboard stated default for USB legacy keyboard support unenabled. Enabling stated to resolve some WIN98SE shutdown problems. Good luck.
0
Response Number 6
Name: Dan Hurst Date: January 13, 2000 at 20:49:53 Pacific
Reply:
Critical step is Enable USB legacy keyboard support in BIOS.
Summary: Dear Dan: is this because I have an older keyboard (18 pins) that the "USB legacy keyboard support in Bios" should be enabled? Here is what happened to me: in device manager, usb controller folder, t...
Summary: HI, I attempted to install a Ezonics DualCam on my win98 (4.10.98) 200 mhz PC. the digital "Still" camera drivers loaded. The "video" drivers invoke the Blue screen of death. "NTKERN.VXD device loader...
Summary: I am having problem when I installed belkin USB PORT HUB PCI-card into the slot available after installing message pop-up that NTKERN.VXD device loader(s) can not load the USN ROOT HUB device driver w...
0 
himem.sys
