Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
SiS 6326 TV out Problem
Name: Anil Date: February 23, 2001 at 14:48:21 Pacific
Comment:
Hi, Try this if your 6326 TV out is not working. SiS 6326 TV out will be enabled only if the Video out cable is connected to a TV/VCR and the video-input impedence is 75ohms(or less). Just connect a 75ohms(or 47+27+1ohms) resistor between TV out signal (RCA) and ground, Then reboot the system or in the display properties advanced-TV out Tab, change output to VGA+TV and click apply.
Hopefully everyone reads their manual so they already know that. :-)
0
Response Number 2
Name: kevin Date: April 26, 2001 at 02:36:57 Pacific
Reply:
I have a SIS 6326AGP, apparently the AGP doesn't support tv out but I have an S-Video plug and a tv out rca jack on my card. Any comments?
0
Response Number 3
Name: kevin Date: April 26, 2001 at 02:41:01 Pacific
Reply:
Oh yeah. there is no tv out tab in Display Properties so I can't get it to work, why would they put them there?
0
Response Number 4
Name: Chris Date: July 1, 2001 at 10:24:13 Pacific
Reply:
I am experiencing the same problem. I have a SiS 6326 w/8mb w/TV-Out PCI Card, and I've loaded the drivers they gave me, with no TV-Out tab to be found. This is really frustrating. Anybody that has a driver with TV support, it would be greatly appreciated. Also, am I dumb because I can't find the TV-Out software anywhere.. cause I have no clue where it is. What do I do? Where can I go?
0
Response Number 5
Name: juan cruz Date: February 15, 2002 at 14:51:55 Pacific
Reply:
i have a problem with a 6326agp card , i followed the rules of jumper settings to get tv-out, but it doesnīt works, it has two rows of jumpers, jp2, and jp3 (iīm not sure if itīs name is jp3 or jp1), anbody know how to jump the card fot tv out??
Summary: I recently got the 3dfx voodoo 3 video card with tv/out support. when i attempt to output to a tv i get sound but the image is all scrambled. has anyone else had htis problem? im assuming i have to...
Summary: I have a g-force 2 mx video card with tv out and it works fine except for 2 things 1 - I cannot locate a "twin view " option have been using extended desk top and works fine but i cannot play gam...
Summary: I have the same video card but with TV-Out, and my problem started when i tried to connect my video card to my TV with the RCA cable, after that, when I turn on my PC, it just beeps and displays nothi...
0 
