Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Click here to start participating now! Also, check out the New User Guide.
Panasonoic printer error codes
Name: Alessio URso Date: December 9, 1998 at 06:10:49 Pacific
Comment:
I am getting error code E31 from a Panasonic KX-PS600 printer and have no way to find out what is the problem. I live in Honduras and there is no technical support to speak of from the dealers. I would greately apreciate any help.
Name: Tobin Moore Date: May 12, 1999 at 10:58:06 Pacific
Reply:
I have am getting Error 26 on a Panasonic Kxp-4450i The printer will do nothing but sit there with this error. what does the error mean, I cannot find anyting about it online. Thanks
0
Response Number 2
Name: Mark Date: October 13, 1999 at 10:03:04 Pacific
Reply:
I have am getting Error 014e054 on a Panasonic Kxp-4450i The printer will do nothing but sit there with this error. what does the error mean, I cannot find anyting about it online. Thanks
0
Response Number 3
Name: mark Date: March 8, 2000 at 12:12:31 Pacific
Reply:
i am getting an error message e31 on a kx-p4410 lazer printer
0
Response Number 4
Name: Steven Date: March 9, 2000 at 18:21:59 Pacific
Reply:
Anybody know what E31 is. I have a Kx-P4410 clunker, and I keep getting this message. HELP....
0
Response Number 5
Name: Carlos Date: April 29, 2000 at 16:03:17 Pacific
Reply:
Like other users I have a Panasonic KX-P4410 and getting E31 error code I don't know what to do.
0
Response Number 6
Name: Syd Chenoy Date: May 8, 2000 at 23:57:30 Pacific
Reply:
The E31 error code shows a burnt out or faulty fuser lamp or temp is below 357oF for 1 minute. (possible thermostat problem). Problem is after it's corrected the reset sequence is a Panasonic secret. Anyone know the reset sequence as it sure doesn't mimic the HP series II or III's even though it uses the same emulation.
0
Response Number 7
Name: scott dunne Date: May 23, 2000 at 08:22:51 Pacific
Reply:
I am getting an E61 error on printer, power cycle resolves problem intermittly.
0
Response Number 8
Name: Josh Patton Date: September 5, 2000 at 19:02:48 Pacific
Reply:
I have a Panasonic KX-P4410 and it does not print down the center of the page. I have replaced the toner. Any suggestions???
0
Response Number 9
Name: Andrew Date: September 27, 2000 at 04:43:49 Pacific
Reply:
I had an E 31 error on my KXP4420 which had an open fuser lamp. after replacement the error code was no longer displayed. there was no reset sequence to follow.
0
Response Number 10
Name: Alan K. Andre Date: November 7, 2000 at 05:40:49 Pacific
Reply:
Panasonic 4455 - E61 Error Code after changing the overflow toner container.
0
Response Number 11
Name: Sean Burk Date: November 16, 2000 at 06:35:09 Pacific
Reply:
The E51 Error Code indicates that you need to replace the fuser module. The part number is KX-PFS1. Hope this helps everyone regarding this Error Code.
0
Response Number 12
Name: Corey Robertson Date: January 11, 2001 at 05:25:00 Pacific
Reply:
I have a panasonic kx-p4400 and i am getting a E62 Error code. Does anyone have an idea.
0
Response Number 13
Name: RoadRunner Date: January 17, 2001 at 13:07:53 Pacific
Summary: This is an HP printer but you didn't tell us what model. I will list all the different printers and the errors. This is from HP's error code manual; 21 Error/Print Overrun All printers - Too complex a...
Summary: I tried installing a Cannon CanoScan FB620P on my Windows 98SE computer (AMD Athlon/Asus mb) using the worthless factory CD, Canon Creative Image & Scanner Setup, VERSION 1.1. Attempting 'acquire imag...
Summary: how & where can I look up what a certain error code is referring to ? yea, yea, yea I know pay 20,000 dollars & get a degree LOL but what can I say .. some of us like to do things the hard way ...
0 
I need help installing a ...
