Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
no LAN board found help!!!
Name: bhn777 Date: January 30, 2003 at 12:54:39 Pacific OS: windows 98 CPU/Ram: celeron 466/64 megs
Comment:
i recently reformatted my hard drive and reinstalled windows 98. however when i tried to reinstall the drivers for my ethernet card, i got an error message: no LAN board found on your system. i connected my ethernet card to the cable modem and the lights on both are working fine. my ethernet card is a SMC EZ Card 10/100 (SMC1211TX). please help!!!!!
Name: bhn777 Date: January 30, 2003 at 12:57:17 Pacific
Reply:
p.s. my computer is an hp, if that helps.
0
Response Number 2
Name: capt Date: January 30, 2003 at 14:12:12 Pacific
Reply:
Some PCI LAN cards require the software be installed before the PCI card. I know that 3Com works this way. I shut down the computer and remove the card, reboot and install the drivers and then shutdown again and reinstall the PCI card. Reboot and Plug and Play should detect the LAN as new hardware and allow you to use the drivers. In some hard cases you have to try installing the card in another PCI slot to get things to work. Take care and all the best!
Summary: About a week ago my computer, upon booting, began displaying this error: MWave Virtual Device Driver Error MWave Error: VxD005 No DSP board found in system I have an Acer Aspire. I did not change anyt...
Summary: I just purchased a new PC. My old PC with Windows 98 on it did not have a network card as it is from the year 1998. I installed a network card called AON 325. Yet I downloaded the driver and it does n...
Summary: I recieved the message that there was no Operating system found, when I went to boot up a computer that hadn't been on in a few weeks. It had been unplugged from the wall also. I couldn't access the...
0 
