After I installed my Iomega internal ATAPI zip drive my computer never seemed to detect it. I tried everything I could but without succes. Any Suggestions

Go into your config.sys and add Lastdrive=Z

when i install 250 MB Iomega Parallel Zip Drive , pc always say it as scsi interface not as parallel

Please help, when I install 250 MB Iomega Parallel Zip Drive witn window NT4 it never detect the driver like it was, when I use win95. thank Best regards

WHEN I TRY TO INSTALL THE ZIP INSTALL I GET A MESSAGE SAYING - "MUST RUN ON WINDOW NT 3.0 OR 4.0". THEN IT CANCELS OUT. CAN YOU HELP ME SOLVE THIS PROBLEM I ALSO WENT TO THE IOMEGA WEB SITE AND DOWNLOADED THE FILES BUT IT STILL STAYS THE SAME THING. IT ALSO SAYS THERE IS A CONFLICT.

Help!!!:<( I installed Windows98SE 4.10.2222A upgrade from Windows95 sr25 version "C" to get my scanner "Visioneer 5300USB" working. Since then it has been nothing but trouble. Fierst, I lost my modem so I bought a "Call Waiting Modem" by ActionTec. This is a PCI bus internal modem and it is suppost to allow me to answer incoming calls up to 7 seconds in leght while still on the internet. Cool! The real problem I don't beleave was the modem, but the Norton auto update program trying to dail out before the modem was setup and configued. Deleted to auto update program and now it is working. :<) My problem now my windows98 can not find my NEC ZIP100 internal IDE drive. I have tried everything I can think of, install from the floppy that came with the ZIP drive. It says no ZIP drive found. But use the "Norton ZIP Backup floppy to boot, I can read the dir of the ZIP100 backup disk. Turning off auto detect in the BIOS, but in the startup screen still shows Atapi ZIP100 found. So then tried turning the auto detect in BOIS back on. No change. Using the Windows95 CD in the setup to add new hardware. Went to the IOMGA ZIP trouble shooting web site, no help. They say IOMEGA no longer supports its early IDE internal drives. How can that be, I have only had it for 14 months. My system is: Custom built: circa May 1998 ASUS P2B no dash letter motherboard with 1394 Bus Controller and Intel 82371AB/EB PCI Bus Master IDE Controller PII 233 MgHz RAM 64M CD-ROM Mitsumi FX320S !B 32X harddrve: Quantum Fireball 6GB NEC Floppy 1.44 NEC ZIP100 Internal IDE drive Sound Card: Creative Labs Ensonic Soundblaster Video Card: Diamond Multimedia Viper V330 4Meg Case: Enlite ATX with power management printer HP Deskjet 1200C-PS scanner: Visioneer 5300USB modem: "Call Waiting Modem" a PCI modem by ActionTec on "Com5" with Lucent Chip Set mouse: Logatec 4 button MouseMan3 (PS/2) monitor: Viewsonic OPtiQuest V773 17in. Help Please:<|

I have an internal SCSI zip drive with a PCI Adaptec host controller. This is what came with the Zip drive. Now that I placed the SCSI card inside the machine I get a yellow exclamation point in the settings. Obviously this is a conflict but I have absolutely no idea on where to start. Any hints on web sites or books that can help me install this. I hate to call Tech support and have them walk me through it. Please help me. I am tired of sitting on this Zip drive without ever using it.