Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
'Invalid system disk, replace......
Name: Wayne Date: October 27, 2003 at 12:41:44 Pacific OS: 98 CPU/Ram: 200 MMX 88MB RAM
Comment:
After a full format, I restarted with bootdisk in floppy drive, and got the message 'INVALID SYSTEM DISK, REPLACE THE DISK, AND THEN PRESS ANY KEY'. Whether the disk is in the floppy drive or not, the message is just the same. I cannnot get to the A:prompt and then on to the CD Drtive etc etc, so I can continue with the O/S install. I've reformatted a thousand time before with no problem but this is driving me scatty!! Its an old computer, granted but it hasn't been a problem in the past to reload. Could I try booting from a cd rom??? Any pointers would be great.
Name: MaadhuriMN Date: October 27, 2003 at 13:02:42 Pacific
Reply:
Are you sure your Floppy Disk drive is saught and the Win98BootDisk attempted to be read during bootup before the HDD LED is lit?
In that case try with a diffrent Win98 Startup Disk with the suspicion that it is a currupt Boot disk
If a Bad Boot Disk is ruled out, it is possible the floppy drive is damaged if the Boot Order in the BIOS setup is Floppy drive>CD -ROM drive> HDD or CD-ROM >Floppy Drive>HDD.
You can make CD-ROM drive first in BIOS Boot Order and start with Win98 CD to install.
BIOS Boot order must be
1. CD-ROM Drive 2. Hard disk Drive 3. Floppy Drive
0
Response Number 2
Name: michael2 Date: October 27, 2003 at 13:40:44 Pacific
Reply:
If you fidsked you may have deleted the hidden partition where some of the BIOS commands are stored. This is the case with some HP I believe.
If you only format c: then I don't know.
0
Response Number 3
Name: Lenny Date: October 27, 2003 at 17:36:00 Pacific
Reply:
Let me understand? You formatted your hard drive. Now you want to reload win98? You are putting a start up diskette in drive a.You may need a boot diskette with "cdrom support. This will load cdrom drivers that will enable you to load the win98 cd. Good luck Lenny.
0
Response Number 4
Name: mick Date: October 27, 2003 at 18:48:33 Pacific
Reply:
Just in case, try putting the floppy first in the boot order. Also, you can download a file that will create a bootable floppy from www.bootdisk.com.
0
Response Number 5
Name: tommo Date: October 28, 2003 at 02:15:33 Pacific
Reply:
is yor cdrom connnected though the sound card? u mite need old priotairy driver for cdrom,,
Summary: I have an HP XE743. The PC will show the blue HP start screen,then it shows a black screen and "INVALID SYSTEM DISK, REPLACE DISK THEN PRESS ANY KEY".. I have went to both the HP web site and the Mi...
Summary: I had a virus and was advised to format my c: which is my hard drive. I did that and now I get the message "invalid system disk Replace the disk, and the press any key. there is no prompt. I have a wi...
Summary: windows98 corrupted,was told to re-install windows98 are formatting c:drive.went to dos via pressing 'ctrl'at boot up,and formatted c:drive.tried to reboot windows with windows98 start up disk but get...