install 98 on used HD
|
Original Message
|
Name: shoefactory
Date: March 6, 2006 at 17:59:45 Pacific
Subject: install 98 on used HDOS: 98CPU/Ram: Pentium III/256Model/Manufacturer: Gateway/Essential |
Comment: The HD was formatted on a XP PC. Had Win98 on it originally. Want to reinstall Win98 on it. Put disc in drive & boot from it & it says its missing device drivers. Can you help!
Report Offensive Message For Removal
|
|
Response Number 2
|
Name: shoefactory
Date: March 6, 2006 at 19:55:14 Pacific
Subject: install 98 on used HD |
Reply: (edit)When I insert install disc & boot this is the message I get: Your PC does not have a HD, your HD is not functioning correctly or your HD requires a special device driver. When I try fdisk: No fixed disk present When I try format: Required parameter missing Any help?
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: ham30
Date: March 6, 2006 at 20:04:43 Pacific
Subject: install 98 on used HD |
Reply: (edit)Do you have Gateway installation software or Microsoft? If Microsoft, download and run DelPart. That will remove all partitioning. Then try fdisk again. http://www.russelltexas.com/delpart.htm Sorry, I do not check for private messages
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: shoefactory
Date: March 6, 2006 at 20:25:05 Pacific
Subject: install 98 on used HD |
Reply: (edit)downloaded DelPart & it said No Hard Drive found? I think I might have Gateway Install disc. Says Microsoft Windows98 for PCs without Windows on the front of disc.
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: DAVEINCAPS
Date: March 6, 2006 at 20:54:12 Pacific
Subject: install 98 on used HD |
Reply: (edit)The hard drive isn't being seen by the bios. You can't do anything else until you figure out why. What size is it? Is it jumpered and connected correctly? Is it properly identified in cmos/bios setup?
Report Offensive Follow Up For Removal
|
Use following form to reply to current message: