| Computing.Net: Over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to sign up now, it's free! |
IBM Thinkpad 600 and Xircom XE2000 not w
|
Original Message
|
Name: ShaRpiE
Date: April 12, 2001 at 14:09:56 Pacific
Subject: IBM Thinkpad 600 and Xircom XE2000 not w
|
Comment: I have an IBM Thinkpad 600 and a Xircom XE2000 10/100 card. The Xircom card hasn't worked since I bought it and I've talked to Xircom tech support as well as IBM tech support. I also had my Thinkpad serviced by IBM and had a replacement Ethernet card sent by Xircom. I still have the same problem. I get an exclamation mark in the device manager where the Xircom card is. I disabled my modem, my IR, and even my sound to free up IRQs. Not only that, but I also flashed my bios, and followed the directions in the knowledge base of xircom's website to manually change the memory addresses under safe mode. Still no luck. Can anyone help?
Report Offensive Message For Removal
|
|
Response Number 2
|
Name: ShaRpiE
Date: April 14, 2001 at 06:26:55 Pacific
|
Reply: (edit)I was using Win98....however, I decided to give it one final try by installing Win 2000 and upon installation, every device driver loaded with no conflicts (including the MPU-401) and I installed the Xircom drivers and that works too! Windows 2000 definitely fixed my problem :)
 Report Offensive Follow Up For Removal
|
Post Locked
This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
Go to Windows 95/98 Forum Home
