Solved PXE-MOF : Exiting Broadcom PXE ROM

December 23, 2010 at 21:24:51
Specs: Windows 7
My Pc has a problem wen i turn on this mesage appears

Broadcom UNDI PXE-2.1 v14.0.0
Copyright (C) 2000-2009 Broadcom Corporation
Copyright (C) 1997-2000 Intel Corporation
All Rigths Reserved.
PXE-E61 : Media Test Failure, Check Cable
PXE-MOF : Exiting Broadcom PXE ROM
No bootable device -- insert boot disk and press any key

I don't now what to do, I press F2 at the beagining but i dont know what to do at that window, i´ve try to select another boot device but don´t know how!! Please Help, My Software is "Windows 7"


See More: PXE-MOF : Exiting Broadcom PXE ROM

Report •


#1
December 23, 2010 at 23:26:18
This mostly means, that no harddrive or CD/DVD was found to boot from and the computer tries to find a server, that supports network booting, to start an operating system from such server.

Were there ever installed an operating system to your computer?
If so, what happend last, before you got this message?

The original poster should always write the last response !!!
Let us know, if the problem is solved !!!


Report •

#2
December 24, 2010 at 05:02:35
This could happen if the CMOS battery failed and the boot order changed. Go into the BIOS and check the boot order.

Report •

#3
March 18, 2011 at 19:46:36
✔ Best Answer
I had the same problem with myToshiba Satellite C655-S5061. Symptoms were that the system lost momentary contact with the HDD, and a spontaeous reboot would occur. Since I done use a cable to get to my homenetwork, I disabled the PCI 'card' through BIOS/CMOS setup. Afterward, when another spontaneous reboot occurred, the notice was "no boot device detected" or words to that effect. Anyway, I received a reply to my question on this site to check certain things. One of the recs was change the HDD. I have, and it's been working fine for the last 2 days. I'm (only) a bit surprised at a HDD failure after less than 4 months in my posession. However, things happen.

Report •

Related Solutions


Ask Question