Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
How do I setup a D:\ drive
Name: Ben Date: March 22, 2002 at 20:37:57 Pacific
Comment:
I have a C:\ drive right now, but I also have another Hard Drive which I want to make My D:\ drive, how would I do this?
set the jumper to slave on the 2nd harddrive. connect to the same ribbon cable as the othere drive. boot up, enter bios, run the auto detect for the hdd's
0
Response Number 2
Name: Recessed Filter Date: March 23, 2002 at 08:26:02 Pacific
Reply:
You may also have to change the jumper on the existing hard drive. Some hard drives have the same jumper setting for MASTER with a SLAVE and ONLY drive in system, while others have 2 different jumper settings for both situations.
Jumper settings for pretty much all hard hard drives can still be found on manufacturer sites.
Summary: Spec.486DX, 33mhz, 424 mb HDD, 16mb RAM (posted earlier but no useful response so I'm posting again) I bought the following modem: Experience the fastest possible analog downloads through your PC's 16...
Summary: I have got a 2.37GB hard disk, and i would like to replace that with an 40GB hard disk.How do i do that? I look forward to hear form you soon. THanks! ...
0 
search for old 486 mother...
