Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
win2k route with router
Name: Min Date: August 25, 2002 at 20:17:04 Pacific
Comment:
Hi, I have 2 nic cards on a computer with win2k installed. First nic is connected to WAN and second nic is configured as 192.x.x.x and is connected to router. Also, first nic is configured as public and second as private in NAT. However, my other computers cannot go online through router... I need serial help htanks guys... (i have to set up this way cause in order to get onto internet because i need to log on first)
Name: min Date: August 25, 2002 at 20:59:25 Pacific
Reply:
Would using crossover to connect nic2 to router help?
0
Response Number 2
Name: Keith Date: August 25, 2002 at 21:28:13 Pacific
Reply:
Is your Win2k machine acting as a router? If so, your hardware router must be configured to go through the Win2k machine. I am not sure if I am understanding you correctly, but you have a WAN (DSL, Cable, or Wireless maybe?), an Win2k computer (internet working), a hardware router (LinkSys?), and X computers. The X computers are set up to go through the router? Why do you have the router anyway?
Keith
0
Response Number 3
Name: min Date: August 25, 2002 at 21:45:29 Pacific
Reply:
ok ok, in order for me to use internet, i have to log in, that is why i cnanot connect wan(university connection) directly to router. I have to connect wan to my win2k first , which has 2 nic. Then im connecting one of nic to my router, which other computers are conencted to.
0
Response Number 4
Name: Rick Date: August 26, 2002 at 06:37:07 Pacific
Reply:
Enable internet connection sharing on the public nic. Set the other pc's to recive ip info from dhcp, (the box with the public nic). After the public box is connected to the internet then the other pc's should be able to connect as well.
0
Response Number 5
Name: casper Date: August 27, 2002 at 13:50:32 Pacific
Reply:
Go into routing and remote access,set compter up as a router (right click on server - your computer name - choose properties) check box and choose local and demand dial routing. configure local nic to use 0.0.0.0 as default gateway set internet nic to use automatic ip config. This will change slightly if you are using a third party dsl router between your modem.
0
Response Number 6
Name: min Date: August 27, 2002 at 16:34:49 Pacific
Reply:
I don't think you can set default gateway as 0.0.0.0
0
Response Number 7
Name: min Date: August 27, 2002 at 20:50:21 Pacific
Reply:
When i'm connecting internal nic to a router, should i use CrossOver or just cat5
Summary: With my limited experience with routers, I have never seen the ability to run two subnets off the same interface, so i'd say no you can't run routing with just one nic. Just go buy another nic they'r...
Summary: Hi there, I have a Win2k DOmain with some W2K Pro Clients. No I tried to get a Win98 client into my domain. I installed DSClient and rebooted. But everything looks still the same.. I also have IE 5.0 ...
Summary: I have problem with my server. I'm using Win2K Sever with Exchange server 2000. But when I'm using MDaemon as my internet mail server, it doesn't work. Does anybody know how to set Win2K server, Excha...
0 
