Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Click here to start participating now! Also, check out the New User Guide.
W2K freezes Modem problem
Name: Cywrite Date: November 4, 2004 at 11:41:11 Pacific OS: W2K sp4 CPU/Ram: x86 Family 6 Model 8
Comment:
Freezes or shuts down in email on 2nd or 3rd page.
Settings - Control Panel - Admin tools - Event wiewer - Error 7026 "Boot driver or system start driver failed to load." Vvoice Vpctel Vmodem
I found them in C:\WINNT\modem listed as Vmodem.sy_ Vpctel.sy_ VModem.sy_
I have changed modems from Rockwell to Zoom model 2925L with a Lucent chip.
C:\WINNT\compaq\modem: Win called for MDMCHIPV (wrong driver???) N.B. Driver not signed.
Name: pwq Date: November 4, 2004 at 17:03:14 Pacific
Reply:
go to the manufacturers site and download the driver rockwell(chipset) should be a better modem put it in a diff pci slot and install the downloaded driver control panel/system/device manager look to see if its installed properly
also do a manual set up isp disks can be awkward
0
Response Number 2
Name: Cywrite Date: November 7, 2004 at 18:30:12 Pacific
Reply:
Thanks. I have been back and forth but some program keeps calling for HSK modem drivers:
Summary: When booting to DOS at OS selection in W2K, My dos application does not find my modem. I am under the belief that the dos communication program sets the parameters for the modem, and no drivers are n...
Summary: W2K freezes on me and the error log reads : WINMGMT Event 37 WMI ADAP was unable to load winspool.drv performance libary due to and unknown problem with the libary 0x0. Second message is the same but ...
0 
burning cd on the fly
