Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Installed a NIC, now startup issues
Name: mvoltage Date: July 7, 2005 at 07:28:30 Pacific OS: Win 2k Pro CPU/Ram: 1/512
Comment:
I use win2k pro. I usually use dial-up modem. The other day I need to update the OS, so I put a NIC card in, and connected it to my linksys router. Now every time I boot, it acts like it wants to boot from a network. On every bootup it says press CTRL-ALT-B to configure. It also askes if I want to boot from network but it doesn't give me a chance to respond.
I have updated OS, now I've taken out the NIC and I'm using dial-up modem. How do I get the PC to boot without it assuming it is booting to a network?
Summary: I have installed a NIC with multiple IPs, right now you can map a drive through any of the IPs and they will all go to the same place. Eg. \\IP\d$ is the same for any of the IPs configured. Is it pos...
Summary: I tried to install a SCSI HD, by first installing the SCSI card itself and then iwent on to connect the HD itself with the ribbon cable. I tried to boot up with the SCSI HD attached but it didn't so,...
Summary: I am having problems installing a Linksys wireless 4 port router (befw11s4). I have a cable connection that works fine with my computer. Once I connect the Linksys router to the NIC, I lose my inter...
0 
