Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

dhcp no response

Comment:

I have a netgear fvs318 firewall with 8 ports switch, I set it up as dhcp. I connect netgear to a linksys 16 port switch. I have a xeon computer, runing win2k pro, have a intl82550pm nic. Here is my problem: when I connect nic to netgear, it will have good ip (within range i set in dhcp), and it access other computers and access internet. but, if I connect this computer to linksys switch, it will NOT have good ip, I use ifconfig/renew, and has message say"dhcp not responsing". why? please help. tingyu

Name: FishMonger
Date: December 31, 2007 at 09:56:26 Pacific

Reply:

Are you using a straight thru or crossover cable between the Netgear and Linksys?

0

Issues with USB 2.0

dell latitude lm

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: There are a few things to check. 1) is the NIC card working right? 2) is the NIC set to auto for speed? Try looking in device manmager and ensure there is no conflict, set the speed to either 10 or 10...

Summary: I've setup ICS on a WIN2K server. Dialup works fine on the host and able to access internet through the browser. At the client, I check the IP addressing. I can release and renew the address and it wo...

Summary: Don't know if it will help but I had a similar problem myself..my HCF modem decided it would only recognise dial tone if I had it set to United states Country Select...I live in the UK but that settin...