Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Com 1 not working!
Name: Bryan Date: September 30, 2003 at 16:22:03 Pacific OS: Win 2000 CPU/Ram: 256 MB
Comment:
My com 1 is not working eventhough the device manager said there is no conflict and the device is working fine. When i used Hyper-terminal with a loopback plug, the typed character is not transmit to screen thru com 1. I tried it on com 2 and it is working fine.
Name: wanderer Date: September 30, 2003 at 16:33:36 Pacific
Reply:
So you have checked to see if you have two com ports [some mainboards only have one] physically and you have looked at the bios to see that both are enabled and have proper addresses?
Summary: 1. Make sure you specify username/password 2. Make sure you are using same account as what you logged in as. For example if you have logged in using Domain account, and if you use local account for sc...
Summary: Neither of my com ports 1 or 2 work in Windows 2000. They do work in 98 which i still have installed. I have an asus p2b board, and have tried removing them and reinstalling them and that dosen't wor...
Summary: I tried two days to get W2K to read my internal modem set to COM3, with COM1 and COM2 used by the motherboard. No matter what I did, setting the modem to COM1 and disabling that port in CMOS, nothing ...
0 
