Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
collision
Name: kevin Date: February 22, 2002 at 00:43:57 Pacific
Comment:
Hi all, here is my problem. Recently bought a dlink 4 port switch use to link up my two computers. I assigned local ip for the two and as I plugged in the cable from the two machines and try to ping each other, I get request time out. What I see on the switch is flashing led (collision). I tried exactly the same setting, with my friend 3com switch, both can ping and see each other. is there anything I can do? is my switch spoilt? thanks for info.
Summary: I have a problem with collisions on my hub. it is a Linksys 10BaseT hub and i have 2 10BaseT Linksys NIC in My Comp, and a 10/100 NDC NIC in my dads mcahine. Below is a problem i get when i transfer f...
Summary: I know of no max recommendation. I guess it boils down to how much bandwidth all the broadcast sucks up. When it starts to get to be too much and collisions are high, you've about reached your maxim...
Summary: Usually this from packets being lost due to many things. Excessive collisons, busy router interface, duplex mismatch between ports on a switch node or another switch. Check your switch and router inte...
