Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Help ! I tried to install w2k to several ibm hard disk(>30G) with Asus P4b266 moth board. But after the 1st copy file process,it can not boot up. Just display"Press any key to reboot". I can install to a Fujitsu 6G hard disk. Is it a problem with the moth board?
Name: futuretech Date: May 14, 2002 at 23:35:00 Pacific
Reply:
I havent looked at that MB specs, but the 30GB drive is possibly ATA100 and you would need to add drivers to W2K to support ATA100. During setup W2K prompts for F6 if using SCSI or other controllers. You would need to add the drivers by hitting F6 and following the onscreen prompts.
0
Response Number 2
Name: qajfat Date: May 15, 2002 at 02:48:00 Pacific
Reply:
I think your problem is that the c: has not been made active. Go back to fdisk and set it as "active". That should do it. Goos luck.
Summary: Sorry, The corretly message is I can not installed that internal tape streamer under Windows 2000 Proffessional. The Tape streamer controller name under Windows 98 SE was Connor Qic-80 The software is...
Summary: I have a dell that I cloned using ghost and sysprep. I then used wipe drive on the pc. Then I format the disk using any one of these several methods: fdisk, partition magic, w2k install cd. I install ...
Summary: Your last statement is correct. W2k is piggy in that it wants the first partition to itself. So, bite the bullet. Install w2k on the first partition. Then re-install Redhat. The only time I've made it...
0 
To the editor
