Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Creating Installation Boot Floppy Disk, before
Name: Man_in_problem Date: August 6, 2000 at 19:54:58 Pacific
Comment:
i have CD of SCO OpenServer Release 5.0.4 but no installation Boot Floppy, so want to know how to create that and go ahead with installation. Also would like to know whether, it is possible to install it with Windows NT/(8 already on my system?
Name: Craig Date: August 7, 2000 at 13:07:46 Pacific
Reply:
you can get the HBA disk from SCO's site. is is the SLS oss463b supplement. it is actually the updated boot disk for 5.0.4. the link for that site is http://www.sco.com/support/ftplists/osr5list.html just scroll down till you find it. not sure about the second part of your question. i suppose you could but i dont know if it will boot to NT still.
0
Response Number 2
Name: rajasekarg.g Date: June 25, 2001 at 12:17:26 Pacific
Reply:
I have solution for tho question
you can get the installation floppy throgh the installation CD. 1.take any one windows 95 or dos with cdrom enable . 1.put the following command in dos prompt (assume that the cdrom drive is d:) 2.find the EZCP.exe file in cdrom. 3.find the BOOT.IMG file in cdrom. 4.d:>EZCP d:\images\boot.img a: 5.this will extract the boot floppy in unix format.
I have installed windows 98 ,win NT ,unix 5.0.4 in single harddisk with three partition.
Summary: First of all, this is the wrong forum; You should have posted your message on the Linux message board. Linux is NOT Unix. Check if your BIOS has the CDROM as first device to boot from. If your BIOS ca...
Summary: I got UNIXWARE 7 on cd, its a bad question but how do i install it? I guess its not bootable CD so i have to install it manualy BUT HOW??? I have Win 98 only. (and DOS) I made a partition (Partition M...
0 
