Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
System Panic!
Name: chul Date: April 9, 2003 at 20:03:14 Pacific OS: Solaris7 CPU/Ram: 360/128
Comment:
Hello! I have a unix machine.(OS:SunOS 5.7(Solaris7) System:Ultra5/10 SPARC-IIi) That machine is often rebooted after outputing following messages:
"/pci@1f,0/pci@1,1/ide@3(ata0); timeout:abort request target=0 lun=0 Warning:Drive not ready before set_features"
I don't know how to fix that machine. Please help me!
Name: sys_mgr Date: April 16, 2003 at 12:28:51 Pacific
Reply:
Drive not ready before set_features
During the initialization process of the drives, the driver needs to set the feaures such as dma mode/pio mode etc. for the drives. The above stated message would come if the drives are not ready to be programmed. Setting of features would fail. This could indicate a fatal problem with the drive.
Summary: this can happen anytime, and very frequently, sometimes just a couple minutes interal, giving the following error information: Panic [cpu0] /thread = 2a100057d60: Simba1: PBM detected ...
Summary: I'm getting the following message when I try to install from CD1: FORCE,CPU-56 (UltraSPARC-IIe 650MHz), No Keyboard OpenBoot 4.0.5, 512 MB memory installed, Serial #9239914. Ethernet address 0:80:42:1...
Summary: Hi, Since more than a week we are facing a serious problem with one of our Sun Workstations (UltraSparc 2), using Solaris 2.5.1. It keeps rebooting continiously untill I halt the system with . On the ...
0 
