Intel Server Board SDS2 (Features:- Pentium III Processors with 512 KB L2 Cache Integrated Dual Ultra 160SCSI cahnnels on 64-bit/66Mhz PCI bus{AIC-7899} Two integrated Intel Pro82550PM server Ethernet Controllers(100Base-TX {Intel Pro100/B fastEthernet} ) ********************************* Sun solaris 8 Installation Steps:- Step 1: system detect SCSI Controller--------- ch A, SCSI ID:4 Seagate ST336706LC 160 SCSI ID:6 ESG-SHV SCA HSBP M15 ASYN ch B, SCSI ID:0 SOny SDT-9000 a0.0 Step 2: Running Configuration Assistant F2-Continue f4-Add Driver(select this option for SCSI driver (AIC-7899) from floppy ) Step 3: Install Supplemental Drivers F2-Continue Step 4: Select Solaris System Device [ ] Solaris OS 2.7 [X] Solaris OS 2.8 F2-Continue Step 5: Loading Supplemental Driver Installation continue supplemental Driver Installation F2-continue F3-Cancel F4-Done Step 6: Identified Device Drivers cadp160 F2-Continue Step 7: Solaris Device Configuration Assistant [to perform or full scan to identify all system hardware, press continue] F2-Continue Step 8: Bus Enumeration Step 9: Scanning Device Step 10: Identified Device [display all device information] ---- ---- PCI Adaptec AIC-7899 Ultra160 SCSI PCI Adaptec AIC-7899 Ultra160 SCSI PCI Intel Pro100/B fast Ethernet PCI Intel Pro100/B fast Ethernet ----- ----- F2-Continue Step 11: Loading driver com.bef cadp160.bef Step 12: Boot Solaris [ ] NET: Intel Pro100/B Fast Ethernet onboard PCI bus 0, at Dev 3 [ ] NET: Intel Pro100/B Fast Ethernet onboard PCI bus 0, at Dev 4 [X] CD: Target 0: E-IDE CD-ROM 56X/AKH A8E onBus Mastering IDE Controller on Board PCI Bus 0, at Dev 15, F [ ] Disk: Target 4: seagate ST336706LC 010A onAdaptec AIC-7899 Ultra160 SCSI onBoard PCI bus 2, at Dev4 F2-Continue Step 13: > Select (b)oot or (i)nterpreter: SunOS Release 5.8 Version Generic 32-bit warning: /PCI@0,0/PCI-ide@f, 1/ide@0 (ata0) timeout: abort request, target=0 lun=0 warning: /PCI@0,0/PCI-ide@f, 1/ide@0 (ata0) timeout: abort request, target=0 lun=0 warning: /PCI@0,0/PCI-ide@f, 1/ide@0 (ata0) timeout: abort request, target=0 lun=0 warning: /PCI@0,0/PCI-ide@f, 1/ide@0 (ata0) timeout: abort request, target=0 lun=0 automatically Restart the system