Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
serial console configuration + sola
Name: raggmopp Date: October 13, 2005 at 12:18:58 Pacific OS: Solaris 2.8 CPU/Ram: 2x450 MHz 2048 MB
Comment:
Attaching a Lantronix device to the ttya port on a E420R Sun system. Telnet to the port and I get the telnet connection message but no login. This is a headless system so ttya is the console by default (it should be from what I have read)
Have 10 other SUN systems - same configuration. Telent to the ttya serial console and I get the login prompt.
I have been through admin tool to verify that settings are the same. I see no difference. Where else should I be looking?
Summary: Is it possible to send Stop-A to a Sun Ultra 30 over a serial console? Unfortunately, the system that I'm connecting from runs Linux and therefor does not support `tip`. Hence, I am using Columbia's K...
Summary: I'm currently setting up a remote console access for my SUN Solaris e420r. I have a CISCO router 3640 which I intend to connect to the serial port A of the E420r. In order to do that, i got an RJ45(F)...
Summary: I've got a Sparc10 workstation with SunOS 4.1 currently installed on it. Is it possible to install Solaris 8 from CDROM, using a serial connection? Using the serial connection, I'm able to get to the...
