Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
No monitor display on boot
Name: ksavage Date: May 4, 2005 at 16:07:24 Pacific OS: Solaris 7 CPU/Ram: ?/128mg
Comment:
I was away for a week and powered down my Spark 20. When I tried to turn it back on, it powers up but the monitor 'says' "No Input Signal" and apart from hearing the fans whirl nothing else seems to happen.
I have done a STOP-D when I power up and the 4 'lock' lights flash twice and the caplock light turns on flickers and then stays on for about a minute. The caplock light then goes off and again all I hear is the whirl of the fan. The monitor is a dual input 21 inch by Sun and the second input that is connected to my docking station works fine.
Summary: Wanted to know if someone could tell me how to make my network interface come up automatically on boot. I am running Solaris8 and have to do 'ifconfig interface up' in order for the interface to come...
Summary: Hi, I've got an IPX box with SunOS 5.6. I attached a Sun keyboard and monitor that came with a Sparc10 to the IPX box. However, the IPX box does not respond when I try to login using the console: I ...
Summary: Can anybody please help me troubleshoot this problem on my Ultra 5/10. This is what's displayed during the POST as seen from ttya and it hangs at Size (last line). There are no LED lighted on the keyb...
