Dears, I have the following error in /var/messg. ############################################### Aug 3 13:12:37 damdttx902-o scsi: [ID 365881 kern.notice] /pci@83,4000/FJSV,ulsa@2 (fjulsa1): Aug 3 13:12:37 damdttx902-o Cmd (0x47aad88) dump for Target 0 Lun 0: Aug 3 13:12:37 damdttx902-o scsi: [ID 365881 kern.notice] /pci@83,4000/FJSV,ulsa@2 (fjulsa1): Aug 3 13:12:37 damdttx902-o cdb=[ 0x0 0x0 0x0 0x0 0x0 0x0 ] Aug 3 13:12:37 damdttx902-o scsi: [ID 365881 kern.notice] /pci@83,4000/FJSV,ulsa@2 (fjulsa1): Aug 3 13:12:37 damdttx902-o pkt_flags=0x14000 pkt_statistics=0x60 pkt_state=0x7 Aug 3 13:12:37 damdttx902-o scsi: [ID 365881 kern.notice] /pci@83,4000/FJSV,ulsa@2 (fjulsa1): Aug 3 13:12:37 damdttx902-o pkt_scbp=0x0 cmd_flags=0x60 Aug 3 13:12:37 damdttx902-o scsi: [ID 107833 kern.warning] WARNING: /pci@83,4000/FJSV,ulsa@2 (fjulsa1): Aug 3 13:12:37 damdttx902-o command timeout for Target 0.0 ############################################################# and the format output is : ############################# 0. c0t0d0 <MAXTOR-ATLAS10K5_147SCA-JNZH cyl 40889 alt 2 hd 8 sec 878> /pci@83,4000/FJSV,ulsa@2,1/sd@0,0 1. c0t1d0 <MAXTOR-ATLAS10K5_147SCA-JNZH cyl 40889 alt 2 hd 8 sec 878> /pci@83,4000/FJSV,ulsa@2,1/sd@1,0 2. c1t0d0 <HITACHI-HUS103014FL3800-SK02 cyl 63228 alt 2 hd 5 sec 907> /pci@83,4000/FJSV,ulsa@2/sd@0,0 3. c1t1d0 <FUJITSU-MAW3147NC-3701 cyl 38343 alt 2 hd 8 sec 936> /pci@83,4000/FJSV,ulsa@2/sd@1,0 ############################3 I have replaced the disks (2 and 3 related to c1, but i have still havve the error I would like to knwo what is the /pci@83,4000/FJSV,ulsa@2 device to replace or fix Kindly if you advise, Najwa

At openboot prompt type devalias Fujitsu device control name "ulsa" (Ultra LVD SCSI Adapter) Is this a Veritas issue? "Best Practices", Event viewer, host file, perfmon, are in my top 10

You can check the status of your hard disk with the help of iostat -en if in this it showing the hard ,soft and truncation error so that you can trace out weather your disk is working fine or not NIrmal Bhatt