Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
How to configure second NIC
Name: mike Date: September 6, 2001 at 06:11:51 Pacific
Comment:
Sun Ultra 10 and Solaris 8 One 10/100 built in NIC, Works properly as hme0
Second NIC 3Com XL PCI 3C900-Combo doesn´t work at all and is NOT listed when ifconfig -a
Done init 0 boot -r Tryed plumb but with error msg. Tryed ifconfig ie0 10.0.0.1 >error touch hostname.le0 rebooted and so on. Nothing helps. Any idé what the problem is?
Name: mike Date: September 7, 2001 at 02:10:19 Pacific
Reply:
Ok, removed the second NIc if it was a hw problem. Installed a new 3c 509 instead. Done the plumb thing and still nothing works, also touched a new file called hostname.hme1 and removed the old one le0.
PLEASE Help me!
0
Response Number 2
Name: lud Date: September 9, 2001 at 17:43:49 Pacific
Reply:
Hey,
Make sure the driver for your NIC is loaded correctly. You need at least: /kernel/drv/yourNIC and /etc/yourNIC.conf. It should be shown by prtconf or in /etc/driver_aliases and /boot/solaris/devicedb/master. You can put the static IP in /etc/hostname.hme1 or *.le1. Everything should work.
Summary: Hello there, I would like to know how to configure a network EPSON LQ-590 printer on solaris 10. i used the printmgr utility and selected previous and later versions available but didnt work. thank y...
0 
