Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
how to configure NIC
Name: fayyaz Date: July 23, 2001 at 10:38:05 Pacific
Comment:
how to configure realtek 8139 driver and how to assign ip address pls write in detail
Name: vikram Date: July 24, 2001 at 06:45:46 Pacific
Reply:
if ur nic is pci in 2.6 & 2.7 i think it is not possible. try it in 2.8 solari version.
if it is 16bit card that should be ne2000 compatable. if it is insert in the slot. boot the meachine while booting press ESC and probe the device it will show in device list. if it is not list u have to set IRQ and I/O BASE.
0
Response Number 2
Name: KeepGood Date: July 30, 2001 at 11:13:27 Pacific
Reply:
Download the Solaris drivers for the 8139 card from www.realtek.com.tw. There is an install script with the drivers. Run the script with './install'. your drivers will now be installed. You need to create a file in the /etc directory called 'hostname.rtls0' this simply holds the name of the system. From the console type 'sys-unconfig' this will blank the system settings and reboot the system. When the system reboots it will run through the network setup. And all should be running. Email me if you have probs. :-)
Summary: Hi I have installed Solaris 8 on intel platform. The installation procedure has not detected my NIC card.Let me know how to configure once I add the required patch... Thanks ...
Summary: Hello there, I would like to know how to configure a network EPSON LQ-590 printer on solaris 10. i used the printmgr utility and selected previous and later versions available but didnt work. thank y...
0 
