Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Using Com Ports on iPAQ 3835
Name: thellis Date: November 5, 2002 at 16:51:13 Pacific OS: Windows CE 3.0 CPU/Ram: 64
Comment:
Okay, I purchased a Radio Shack DigiTraveler GPS receiver specifically for an iPAQ 3835. The manual (one sheet) says to use the Settings feature and select Com 1. But in the dropdown there is only Com 3 and Com 4? I have tried EVERYTHING. Com 1 appears to be reserved for a modem - but I don't have a modem, I don't have any hardware installed and this is the first software I've installed. Installation of software on my laptop and hand held was just fine - but when trying to connec to the GPS device - "No GPS device detected...."
I would really appreciate any advice or information relative to this problem.
Name: Laurin Date: November 17, 2002 at 05:18:10 Pacific
Reply:
Have you found the answer to your problem? I purchased DigiTraveler for my IPAQ 3870 and have exactly the same problem. Also tried the mobile version of MS Streets. It also does not recognize the DigiTraveler. Also tried hooking up to two of my Garmin GPS's - in both cases. I think there must be something about the settings on the IPAQ 3800 seires....
Summary: When installing ActiveSync 3.5 on my computer I set up synchronisation with my IPaq using USB and Infra-Red. Whenever I boot my PC (the IPaq is not in the USB cradle) I now receive a message saying: "...
Summary: Hi I wanted to know if I can open a com port in an application written in eVB and make it run on the PPC x86 emulator that accompanies the embedded visual tools ? Thanks in advance. ...
Summary: Okay, I purchased a Radio Shack DigiTraveler GPS receiver specifically for an iPAQ 3835. The manual (one sheet) says to use the Settings feature and select Com 1. But in the dropdown there is only...
0 
