I'm trying to get a fresh install of Warp 4 to login to my existing NT 4 Domain, but all I get is "The remote node or domain server is not currently available". The Warp box has managed to obtain a lease from the DHCP server.

Make sure that your running netbios over IP and that your netbios type is H-Node and that you have your WINS servers listed in your NETBIOS broadcast lists.

For some reason I can't get the NETBIOS over TCP/IP to load. I get a "NET3406: An error occured while opening network device driver NET1=NETBEUI$", followed by a "SYS1719: The file C:\IBMLAN\NETPROG\NETWKSTA.200 specified in the IFS statement on line 133 of CONFIG.SYS file does not contain a valid device driver or file system driver." I tried to check the help, but net won't run because I can't load the requester!

Scott, just FYI, we have EXACTLY the same problem you have except this is on a Warp Connect machine. Would appreciate any info you find that works for you. Also will let you know if we find a fix. Thanks.

In response to the error messages after setting up Warp connect or 4 with Netbious over tcp/ip, you MUST reinstall Peer networking. Not the full install just start the installation, select Configure this workstation and select not to overwrite or change the NET.ACC, MPTS. Reboot and the problem should go away. Now....if I can get the correct method to connect a Warp connect client to a Win NT server through a router...

How do you just reinstall the Peer networking. I see File and Print Services but not Peer networking. Thanks