I have AMD Duron 1.2 GHz, 128 RAM, 32 MB TNT 2 / Vanta, HDD Seagate 40 GB and 52X CD-ROM. After, Installed i can use it about 2 months. And now every time when i start my computer. I'm see this message: TRAP 000d ERRCD=0000 ERACC=**** ERLIM=******** EAX=00000004 EBX=0095fff0 ECX=00001330 EDX=00000000 ESI=9bbb4938 EDI=000000d6 EBP=00004a1a FLG=00213296 CS:EIP=0718:0000c41a CSACC=009b CSLIM=0000efcb SS:ESP=0030:000049fe SSACC=1097 SSLIM=00003fff DS=0738 DSACC=0093 DSLIM=0000fd77 CR0=8001001b ES=1330 ESACC=0093 ESLIM=0000ffef CR2=fc87att8 FS=03b8 FSACC=00f3 FSLIM=00000023 GS=0000 GSACC=**** GSLIM=******** The system detected an internal processing error at location ##0160:fff54c70-000d:ac70. 60000,9084 06860671 Internal revision 9.023, 95/11/07 The system is stopped. Record all of the above information and contact your service representative.

Maybe some hardware went bad (e.g. RAM), test this and do a chkdsk on the drive booting from service floppy disks or bootable CD. Another thing is your service level, looks like plain Warp4 without Fixpak? You can install FP12 or 15 (with FP15 you can use current kernel level). Don't forget to make a backup first...

Also... this may happen if you installed drivers for a new device.. you can boot with Utility or Install disketes or boot using the "Alt-F1" hot key [[when the little white "OS/2" block appears in the top left corner of the screen at boot If you choose "command prompt" from the menu, that runs a different "config.sys" file]] this way you could try another "config.sys" or try an older one to see if it boots.