I have an old Super Micro P54CT motherboard, it has 32MB edo currently installed. After installing an additional 64MB, the full 96MB is recognized at boot up and in the BIOS, but half way throught the OS/2 boot the system traps out with the following information: Exception in device driver: TRAP 000D ERRCD= 02f3 ERRAC= 10f2 ERRLIM= 00010fff EAX= fc86f001 EBX= 742000 ECX= f9c03dd8 EDX= 00000e0d ESI= fc86f1a6 EDI= fc86efff EBP= 00004da8 FLG= 00013292 CS:EIP= 0168:fff7el34 CSACC= c09b CSLIM= ffffffff SS:ESP= 0030:00004d98 SSAC= 1097 SSLIM= 00003fff DS= 0160 DSACC= c0f3 DSLIM= ffffffff CR0= 8001001b ES= 0160 ESACC= c0f3 ESLIM= ffffffff CR2= f3073000 FS= 03c0 FSACC= 00f3 FSLIM= 00000023 GS= 0130 GSACC= 00f3 GSLIM= 00005713 THE SYSTEM DETECTED AN INTERNAL PROCESSING ERROR AT LOCATION ## 0168:fff26312 - 000e:c312. 60000,9084 05860524 INTERNAL REVISION 14.044_w4 I'm not sure how to find out which driver is causing the problems. Any suggestions would be appreciated.

is your bios enabled for greater than 64 meg with os/2. many boards have option to turn on. try installing the new 64 ram alone in original slot, if ok then add 32