Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
I have installed a Warp4 with Fixpak5 on my computer successfully. However I am encountering intermitten sys3175 trap 000D and 000E problem. Problem occured when I try to run an OS/2 application to open a file.
My system is a Pentium 266 with two 128MB SDRAM @133MHz. I am using a Maxtor 11GB HDD. Attached below is the error extracted from POPUPLOG.OS2
I have spend many days trying to fix this problem without success. Would appreciate very much if anyone can provide some help to troubleshoot this problem
Summary: A trap 000d is a general protection fault. This is like when a program allocates an array with 10 elements, then references the 11th (goes after unallocated memory). To pinpoint the failing program...
Summary: Following is the information from the Trap screen that I have not recorded myself. So I can not guarantee that all the information is correct, but from my experience in other Traps, the values seem to...
Summary: I've been tinkering with OS/2 and I followed Jacco de Leeuw's method to add networking to non-connect WARP 3. I went through all the steps properly but I'm now faced with a TRAP 000D error "exception ...
