Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
OS2/warp4 Install problems
Name: Pete Date: June 13, 2001 at 01:23:32 Pacific
Comment:
I have set aside a 24 gb unpartitioned space on my hard drive. Booting from CD and using the floppies I made, I get to the screen of setting up the partiotion. I select the unpartitioned space and here is where my problems begin. It seems I cannot advance any further in the setup as the option buttons are not enabled?
Name: Pete Date: June 13, 2001 at 01:24:56 Pacific
Reply:
sorry a 2 gb unpartitioned space, not 24 GB.
0
Response Number 2
Name: Andy B Date: June 13, 2001 at 15:35:31 Pacific
Reply:
Have you updated the installation disks?
0
Response Number 3
Name: Pete Date: June 13, 2001 at 16:21:18 Pacific
Reply:
?????? Where?
0
Response Number 4
Name: Andy B Date: June 15, 2001 at 02:38:57 Pacific
Reply:
The procedure described in http://de.os2.org/forum/helpdesk/index.php3?all=36839&order=2&langs=all should do the trick.
0
Response Number 5
Name: Satyadev Date: November 22, 2001 at 04:44:14 Pacific
Reply:
Pete, Hope you have solved the problem by this time. If not please go this site and download updated disk1 & disk2. Follow the instructions given below and complete the Installation.
Summary: I've read that if you disable primary and secondary cache in the Bios can solve installation probslem like this. Just enable it once OS2 is installed. ...
Summary: I've created new partition with nothing on it. I boot on Windows 98SE floppy. I've copying the OS2 Cd on an other visible partition and chage some parameter on the config.sys's file to configure secon...
Summary: i installed warp4 on about 30 Hp Vectra VE`s 350mhz/8gb, i got around the partition problem using old faith full, "partition Magic" & nt 3.51 Fdisk the only problem i found is wiyh the onboard network...
0 
