Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
OS2 Warp3 installation
Name: sullivan Date: December 18, 2002 at 08:22:02 Pacific OS: Windows 98 CPU/Ram: PIII 128Mo
Comment:
I've created new partition with nothing on it. I boot on Windows 98SE floppy. I've copying the OS2 Cd on an other visible partition and chage some parameter on the config.sys's file to configure second partition access. I've got also an USB floppy I've got message during os2 Warp3 installation like : OS/2 !! SYS01475 & OS/2 !! SYS02027 and I can't do anything after that ... Does any body help me please
Name: Jonas Buys Date: December 20, 2002 at 02:09:46 Pacific
Reply:
Do I get it right? Are you installing Warp from HDD??? Could be the bottleneck, though I doubt.
If your only floppy device is the USB drive, then you'rew in problems: OS/2 NEEDS an A:-drive that is attached to a floppy disk controller on the mainboard.
Hope you didn't make partitions with old DOS FDISK, since this product is inferior and out-to-date...
Summary: I draw out an old copy of OS2/warp 3 to install it on a PC (AMD 450 MHz) with two IDE hard disks (8.2 Gb and 20 Gb, and running with Windows '98 and Linux. The boot manager is Partition Magic boot man...
Summary: Hi I've just received original os2 v2 disks and manual but the installation disk seams to be faulty. Can anyone send me a winimage of this disk? Thanks in advance. Hope the others are ok. PS- I have V...
Summary: I have a multi-boot system that I am trying to add OS2 4 to it. The system: BX6 pIII 1ghz 512 MB RAM Rage128 AIW AGP / Rage128 PCI 2x 40GB drives To play it safe, I am attempting the install onto an ...
0 
