OS/2 Warp 3 wont boot after install

Original Message

Name: Leo the 28C (by Sulfurik)
Date: May 14, 2005 at 21:14:28 Pacific
Subject: OS/2 Warp 3 wont boot after install
OS: OS/2 Warp 3
CPU/Ram: 450 MHz/512 MB RAM

Comment:

Hello every1!! :D
OK, so once I got OS/2 from eBay for like $20-30 and floppy Disk 2 was damaged...
Now, I found the exact same version on the thrift store for $3... ARGH!! :@
Well, the disks are fine...but once I finished installing it, it told me to remove the floppy and reboot, so I did, but then, it showed me the "ALERT: Cover was previously removed." message that I ALWAYS got since I bought this PC, and then just a blank space with a "r was previously removed." after it...and there it sits... I've tried removing the (Win98) CD on the CD tray and it didn't work...maybe the RAM's too big?? gonna try removing some of it...
What other things can I do??
Thanx!! ;)
http://www.boredsource.com/eltrucha/
ftp://tsfc.ath.cx
hotline://tsfc.ath.cx
Little Johnny took a drink
but he shall drink no more.
For what he thought was H2O
Was H2SO4.

Report Offensive Message For Removal

Response Number 1

Name: Leo the 28C (by Sulfurik)
Date: May 14, 2005 at 21:17:42 Pacific
Subject: OS/2 Warp 3 wont boot after install

Reply: (edit)

Not even 10 minutes since that last post and I already fixed it..I had to remove some RAM... sorry for posting before trying... XD
http://www.boredsource.com/eltrucha/
ftp://tsfc.ath.cx
hotline://tsfc.ath.cx
Little Johnny took a drink
but he shall drink no more.
For what he thought was H2O
Was H2SO4.

Report Offensive Follow Up For Removal


Problem with OS/2 Warp 3.0 OS/2 Warp 3 installation problem Need OS/2 Warp 3 boot disks OS/2 Warp 3 Installation Problem OS/2 Warp 3 floppy on VPC 2004	OS/2 Warp 3.0 install floppy bad. OS/2 Warp 3 Install floppy corrupt Problems installing os/2 warp 3 OS/2 Warp 3 Install woes Install OS/2 Warp 3.0