OS2 printing to network HOW?
|
Original Message
|
Name: Andrew Cornett
Date: August 26, 2003 at 19:25:08 Pacific
Subject: OS2 printing to network HOW?
OS: OS2warpv3.00
CPU/Ram: PIII 800mhz
|
Comment: I need to know how to set up OS2 to allow it to print to a network. What settings, etc? I have a printer that has its own IP address and is connected through a network. My tool running OS2 software is also on the network. What I am trying to accomplish is setting up OS2 on the tool so that it will print to the network printer and not through serial/parallel ports. If any body knows how to do this could they please email me a procedure. Please email me if you need further clarification. Thanks very much Andrew.
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: melf
Date: August 28, 2003 at 13:15:20 Pacific
Subject: OS2 printing to network HOW? |
Reply: (edit)I have never done that myself, but there is a headline in the tcp/ip configuration notebook that is called "printing". I guess you can specify printeradress and so on there.
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Sean Dennis
Date: September 1, 2003 at 17:45:42 Pacific
Subject: OS2 printing to network HOW?
|
Reply: (edit)If you go into the Printers folder, create a shadow of "Network Printer". If you're running your printer on a print server, I'm not quite sure what to do as I've not done that m'self.
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: Jan Magne
Date: October 12, 2003 at 08:15:11 Pacific
Subject: OS2 printing to network HOW?
|
Reply: (edit)Hi It seems that what you need is LPR printing. If this is still a problem, please feel free to e-mail me, and I'll try to guide your through. regards
Jan Magne
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
