I'm Trapped in OS/2
|
Original Message
|
Name: subsonic1
Date: February 12, 2001 at 14:16:32 Pacific
Subject: I'm Trapped in OS/2
|
Comment: Hey All, I've been trying to instal OS/2 Warp on my PC and I keep running in to a Trap Error theres a whole bunch of information that I have no idea what it is. Heres the stuff.=======================================TRAP _000d___ ERRCD= _0000___ ERACC=_****__ ERLIM= _********_______EAX= _00000000__ EBX= _ffe30000_ ECX= _00000000_ EDX= 0000000_ESI= _00007blc__ EDI= _ffelcblc__ EBP= _0000444a_ FLG= _00213297__CS:EIP= _0148_ : _00008ee1__ CSACC= _009b_ CSLIM= _0000a2fa__SS:ESP= _0030_ : _00004ebe_ SSACC= _1097_ SSLIM= _00003fff_DS= _0400_ DSACC= _00f3_ DSLIM= _00007504_ CR0= _80010013_ES= _0158_ ESACC= _c0f3_ ESLIM= _ffffffff_ CR2= _fc81900_FS= _0000_ FSACC= _****_ FSLIM= _********_GS= _0000_ GSACC= _****_ GSLIM= _********_THE SYSTEM DETECTED AN INTERNAL PROCESSINGERROR AT LOCATION ## 0160_ : _fff54c70__ - _000d_ : _ac70_ Any help would be appreciated. Thanks SUB
Report Offensive Message For Removal
|
|
Response Number 2
|
Name: Perry Werneck
Date: February 14, 2001 at 11:10:55 Pacific
|
Reply: (edit)Well, You have a Trap. (((-: The problem happens during the boot with the instalation disks? Did you try boot using ALT-F2 to see in wich point of the config.sys it traps? By the way: Wich version? The original Warp4 or the Convenience Pack? Perry.
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: Mark p
Date: February 15, 2001 at 11:31:01 Pacific
|
Reply: (edit)Try pressing Alt-F1 when the OS2 square appears on the top Rh corner of your screen. When the menu appears select load VGA drivers and see what happens. Good Luck
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: destiny
Date: February 24, 2001 at 11:36:08 Pacific
|
Reply: (edit)describe version of warp, your system hardware, what other OS you have installed, & how your drive is partitioned. you may require a newer hard drive device driver
Report Offensive Follow Up For Removal
|
Use following form to reply to current message: