Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
All (OS/2)Warp ver. 3 and ver. 4 users should make/have a set of Utility Disks, in case you need to boot from floppy or hard drive failure. Go inside the System Setup object and click on "Create Utility Disks". Warp3 creates three utility floppy diskettes and Warp4 creates four utility floppy diskettes.
Summary: Check out the sites below. They might help answer parts of your problem. If you had a fully installed version of Warp including fix packs, you could use the create utility disks function to create u...
Summary: You need to download the drivers for large hard drives. You should then be able to replace the files on disk 1 and the operating system will boot and run. You can create new disks from your Warp CD....
Summary: There is a utility on the CD that will allow you to recreate the floppy disks so you can install from CD. Below are older messages on the same topic. try cdinst.bat or cmd on the CD. It'll create boot...
Boot Disk Needed
