Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
3Com Etherlink III PCMCIA driver
Name: IBMWarpster Date: February 6, 2004 at 22:58:47 Pacific OS: OS/2 Warp 3 CPU/Ram: Pentium 90Mhz / 48MB / 81
Comment:
1) Does OS\2 use Windows 3.1 / DOS NDis drivers?
2)If not, anyone know where I can get a driver for my card. I dont see any on 3Com's site nor do I see the files in the disks.
Name: IBMWarpster Date: February 6, 2004 at 23:11:18 Pacific
Reply:
nevermind, I found it. I dont know why 3Com doesnt have it. anyone in need of a Nic driver for Warp 3, look at
http://www.juge.com/bbs/Os2.Html
Im not sure whats all there, maby more than NIC drivers. ALOT of files. ========================================== And as far as I know now, 3Com doesnt use LAN Manger or WFWG NDIS drivers.
0
Response Number 2
Name: melf Date: February 7, 2004 at 08:35:55 Pacific
Reply:
For NIC's, have a look at the best place: http://pws.prserv.net/mckinnis/nicpak
Summary: Sorry, meant to get back to this quicker. I was able to install and get past the reboot and into the setup. Seems like everything was self-explainatory, but I must have goofed somewhere regarding har...
Summary: Eric, I GENERALLY agree with previous response but I KNOW that HDD requirements given are LOW. Try 80MB *min.* for ver.3; 120MB *min.* for ver.4. Also, Ver. 4 ("Merlin") comes ONLY on RO-COD; so you H...
Summary: Hi folks, I've run into a rather annoying issue. I have a good system to run os/2 on that can't really be used for much else at the moment, and I get the OS installed fine, got to set the desktop to s...
0 
