zoom ADSL 5651 and Linksys WRT54G V

Original Message

Name: undnyc
Date: July 22, 2007 at 09:44:09 Pacific
Subject: zoom ADSL 5651 and Linksys WRT54G V
OS: WINXP
CPU/Ram: Intel
Model/Manufacturer: Dell

Comment:

Can someone help me out accessing ZOOM ADSL modem console at 10.0.0.2. For some reason a cannot access it to open some ports....i have wrt54g v3 setup and zoom adsl 5651 modem.
Can someone help me out....?

Report Offensive Message For Removal

Response Number 1

Name: picohat
Date: July 23, 2007 at 18:06:12 Pacific
Subject: zoom ADSL 5651 and Linksys WRT54G V

Reply: (edit)

If you wish to open port for port forwarding or firewall traffic blocking, thought you should do it on wrt54g router but not the modem. Check your router management page, you should be able to see those settings.
Hope helps..

Report Offensive Follow Up For Removal

Response Number 2

Name: undnyc
Date: July 24, 2007 at 13:18:01 Pacific
Subject: zoom ADSL 5651 and Linksys WRT54G V

Reply: (edit)

I set my modem in bridge mode but still cannot open ports thru my LINKSYS router.....

Report Offensive Follow Up For Removal

Response Number 3

Name: OldNetMan
Date: July 24, 2007 at 20:43:45 Pacific
Subject: zoom ADSL 5651 and Linksys WRT54G V

Reply: (edit)

The 10.0.0.2 is a non-routable address. It is the Linksys that needs to be put into bridge mode if you want to connect to the zoom. An easier solution is to temporarily attach the Ethernet cable from the zoom to your computer, make the change and then re-attach to the Linksys. Otherwise, all your network addressing changes.

Report Offensive Follow Up For Removal


Origo ASR-8400 And Linksys WRT54GS Linksys wrt54g and wusb11 problem Linksys WRT54G router doesn't work? Linksys WRT54GS Firmware problems Linksys wrt54g	Netgear WGR614 Vs. Linksys WRT54G Linksys WRT54G no wireless internet dialup ics with linksys wrt54g Conn. Linksys wrt54g to cisco 677 Linksys WRT54GS & Laptop