Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Wireless router
Name: kmans777 Date: June 4, 2005 at 01:28:30 Pacific OS: Win 98SE CPU/Ram: XP2400/512mb
Comment:
Hi all, attempting to install a wireless router and share a broadband connection. My modem is a Motorola surfboard. Modem works fine using the USB connection. Problem begins with router(linksys) not having USB but ethernet cable/connector. Cannot get my motherboards (asus A7N-8XE) ethernet ports to work. The modem has both USB and ethernet connectivity. I removed the USB driver and tried to reinstall the modem using the ethernet connection but no go. Says not connected to modem. Tried to install an old netgear nic but no go there also. Since having tried this I now keep getting new hardware found for a PCI ethernet controller on bootup. No nic installed in slots. Any help appreciated. Thnx, Karl
Name: Paul Fahrenbach Date: June 4, 2005 at 18:21:59 Pacific
Reply:
Try puting Nic in differ slot, also try changeing the option, if you have a bios option for Plug and Play OS. or None Plug and Play OS. I have had a couple that changeing the Plug and Play OS. option was the only think that would get the NIC to work.
Summary: Hi. I am now posting in the write section sorry about before. This was hard to explain so please read whole thing. I have 2 wireless routers one belkin N1+ which is plugged into my phone and is th...
Summary: I have an internet connection which is dispersed by the wireless router. from that router i have connected a wire and pulled it into a switch. And from that switch i am giving the connection in my ...
0 
