Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
W2K Netowking Help
Name: Kyle Date: February 15, 2003 at 16:57:22 Pacific OS: Windows 2000 CPU/Ram: P3 1000MHz / 512MB RAM
Comment:
If you can see the attached image please tell me what settings i can change on any/all computers so that i can file share between any/all of them.
The image is at http://www.angelfire.com/film/kylesftpserver/images/The_Network_That_I_Have.jpg if you cant see it.
Name: Galacticroot Date: February 15, 2003 at 18:25:49 Pacific
Reply:
Couple questions: Is the "DSL box" a bridge or a router? Also, do you have a static IP, DHCP, or PPPoE?
0
Response Number 2
Name: Paul H Date: February 16, 2003 at 13:22:58 Pacific
Reply:
In a win2k P2P network you MUST have the same username and password setup on ALL boxes unless you have enabled "guest" access on all mavhines. Even doing so you may not see the other machines in Network Neighborhood.
You should still be able to map or conntect to shares by going to start->run and the typing \\xxx.xxx.xxx.xxx where the "x"'s are the IP address of the destination machines.
Summary: Hello.. Thanks for the replys guys. I would like to keep DCHP enabled, mainly because We are a growing office, and I like the flexablity that if someone comes in , its simply to connect a pc to the n...
Summary: I got 2 PCs with W2K on both of them. Both have network cards. After connecting both the PCs with cross over cable, what else I need to do in order get them networked? Also, the 1st PC has quite a few...
Summary: If anyone can help out here, it would be much appreciated. I have a W2K and Win98SE computer networked, they can see each other fine but (for example) when i'm trying to access a file or directory of...
0 
