Unable to Load Sites with Router

Hewlett-packard / Presario c500 (gf572ua#ab...
January 7, 2009 at 21:40:47
Specs: Microsoft Windows Vista Home Premium, 1.733 GHz / 1013 MB
I hope I'm posting this in the right place. If not, please forgive me.

Anyways, I recently upgraded from dial-up to high-speed. I had been using a straight connection from my modem to my notebook with an ethernet cord. However, I wanted to be wireless so I bought a a Belkin Wireless G Router. I got it set up and everything, but for some reason some sites I visit will not load while using the router. If I unhook the router and use the ethernet cord the sites will load. All sites seem to work except for two (as of now). They don't even try to load.. they just switch to page can't be displayed soon as I hit the go button. Is there a way I can fix this without having to unhook my router each time I need to visit these sites?


See More: Unable to Load Sites with Router

Report •


#1
January 8, 2009 at 06:03:26
When you have it set up for wireless, open a command prompt and run
ipconfig /all
Post the results here.

Report •

#2
January 8, 2009 at 06:30:21
I'm not too smart when it comes to this type of stuff, but is running a command prompt the little black window with all the listings regarding my connections after I type ipconfig/all? If so, how do I save that or post it here... or am I doing something wrong? :\

Report •

#3
January 8, 2009 at 07:55:25
You're not doing anything wrong, it's just a little complicated to copy/paste from that command prompt window.

Here's what you do. Once you have the window open (to open a command prompt window go to Start >> Run and type cmd and then hit Enter) and have typed ipconfig /all to copy the output of that command do the following:

1) Up in the very top left corner of the window beside "Command Prompt" you'll see a little black box with "C:\" Left click on that with your mouse and a menu comes up.

2) From the above menu select Edit >> Mark You can now highlight the text you wish to copy with your mouse. Simply left click and hold where you wish to begin copying and pull the highlighted area over the text you wish to copy.

3) To copy the highlighted text either hit Enter or go back to that menu and select Edit >> Copy

You now have the output of the ipconfig /all command saved in a clipboard buffer and can then paste it in your reply. To paste it in your reply, in the reply window simply hit Ctrl - V or, Right click and select "Paste" from the menu that comes up.


Report •

Related Solutions

#4
January 8, 2009 at 07:59:37
Okay, thanks! I just copied everything.. didn't know if certain parts were needed so I did it all just in case!

C:\Users\Dustin>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Dustin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-1A-73-69-D2-D2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1937:341a:58f1:8a57%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.2.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, January 08, 2009 12:39:40 AM
Lease Expires . . . . . . . . . . : Sunday, February 14, 2145 4:24:48 PM
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : cablerocket.net
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet
NIC
Physical Address. . . . . . . . . : 00-1B-38-34-E2-73
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{F5AF42A0-5B64-4867-B0B7-72C2AB93C
3F3}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 9:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.cablerocket.net
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : isatap.Belkin
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:3c31:3192:be84:4c66(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::3c31:3192:be84:4c66%10(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled


Report •

#5
January 8, 2009 at 17:34:12
What sites aren't loading?

The Belkin is getting an IP address and all looks well. You could try giving it a static IP address, say 192.168.2.100 and static DNS entries which would be
204.174.16.4
204.174.18.2
if cablerocket.net is your ISP.
The subnet mask would be 255.255.255.0
The default gateway would be 192.168.2.1

That is done by going to the LAN properties and TCP/IP properties.


Report •

#6
January 8, 2009 at 19:31:17
I put the address in where you said, but there was no mention of TCP/IP properties. I tried it anyways with the address in the correct spots, and my connection gave out, LOL. It would only connect to local and not the internet and nothing would work so I had to reset it. :\

And the sites that wouldn't load were pineconeresearch.com and perezhilton.com. PH.com I could really careless for. PCR on the other hand I need. But, after I reset the router PCR.com is working, but it might stop working again once I secure my connection like I had before...

Edit: Okay.. pineconeresearch.com worked once and soon as I logged in it went right back to page can't be displayed. ;(


Report •

#7
January 8, 2009 at 19:53:37
If you didn't see TCP/IP, then you weren't in the right spot.

Start, control panel, network connections, right click on LAN, choose properties, highlight TCP/IP, click on properties. All static entries go there.


Report •

#8
January 8, 2009 at 23:18:59
Ah, you were right. I was in the wrong spot. And thank you. The PCR site is working fully again and lets me log in. Thank you very much!

Report •

#9
January 9, 2009 at 06:31:10
You're welcome.

Report •


Ask Question