I have 2 PC. Older one was connected with Broadband via Ethernet and was working but now i am trying to connect my newer PC via Ethernet it is not working but working well with usb connect. I have router setting in Bridge mode in both of case. My modem is ZTE-ZX- DSL 831 AII. I m using the same cable. LAN port lights (both yellw n green) remains continuously on. My Lan card is enabled condition. It shows windows default IP 169.254.203.213 Windows IP Configuration Host Name . . . . . . . . . . . . : iit- 6f470aeee4c Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 7: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection Physical Address. . . . . . . . . : 00-00-00- 00-00-00 (modified) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.204.213 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : /b> I configured it manually to 192.168.1.2 and then pinged this ip. It was OK but i tried to ping the DNS IP 192.168.1.1 .. It fails to ping.. that means my PC is not connected with my modem... Test Report for mannual setting this connection is configured to use a static IP address. Ping Gateway 192.168.1.1 : Failed Ping DNS 208.67.222.222 : Failed Ping DNS 208.67.220.220 : Failed No WINS server is available for this connection Ping Network 192.168.1.255 : Failed /b> I dont know what the problem.. So i want to know that there is way to check the Lan card... I already check the properties of Lan card.. Link Speed in Lan card shows 100mbps with full duplex. It also pass the harware test. EEPROM test: Passed Register Test: Passed Interrupt Test: Passed Loopback Test: Passed /b> I have also try loop test using ping ip 127.0.0.1 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms /b> Plz help me .. I want to comnnect my new PC with ethernet

169.254.X is not a valid address (well, it is) but it's auto assigned when you cannot pull an IP via DHCP - so i.e.: the computer was never able to reach the modem. More than likely - you can't have the USB and Ethernet port active on the modem - try unplugging the USB - does the ethernet work? If so - get yourself a switch, they're cheap.

i tried one PC at a time, the Ethernet is not working, i know that my PC is not connecting with modem but what the problem.. whether lan card is faulty or modem or any setting problem