Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
SIS900 OnBoard Problem
Name: JB Date: November 24, 2003 at 18:08:44 Pacific OS: Win98SE CPU/Ram: 2.0/256
Comment:
I have 4 Biostar M7SUA motherboards that won't allow use of the LAN port. They're enabled in the CMOS and the 900 SIS drivers loaded from the install disks. My hub gets no signal that they're alive. I can drop a NIC in a PCI slot and the cable and hub are fine. Is there a trick to getting this on board LAN port working?
Summary: I have a 9 node network using DHCP. All of the machines have been working great until this past week. Node 1: XP PRO / SIS900 Onboard Nic and 2.4 gig P4 is assigned IP by the DHCP of 192.168.0.102. N...
Summary: UHHGG! I have South Western Bell DSL and I'm having trouble getting this ICS crap to work. I have tried every configuration known to man. The modem is an Alcatel Speed PC. The ethernet is an onbo...
Summary: There's still a setting in your Registry for that NIC; that's why you are getting the #2, #3, etc. messages. Sounds like a poorly written driver to me. I'd sidestep the whole issue: just disable t...
