RRAS routing troubles..

March 29, 2009 at 22:00:28
Specs: Windows 2003
One of my servers is configured as a router using RRAS, however, it doesn't want to route packets between the LAN interface ( and the Wireless interface ( - both are static addresses.

The LAN clients are configured to use as their gateway, and they can all ping Problem is they can't ping any other devices on the network - or beyond.

Have verified that the RRAS server is configured as a router, and, it has both a default gateway, along with a static route to In addition, this server has no issue getting out to the Internet; demonstrated by this post tonight.

Ideas? Am I overlooking something simple, or could this be something more in depth, such as an issue with routing over wireless - or some driver issue? Am not using a routing protocol, only static routes is use.

See More: RRAS routing troubles..

Report •

March 30, 2009 at 06:01:32
It would help if you posted the routing table so we could have a look at it.

Report •

March 30, 2009 at 10:26:57
Hope that the formatting isn't to off.. Also, I noticed in my previous post that I had a typo "a static route to"; that should have read static route to

As you can see, there is a static route to the network, and a default gateway pointing to via


Active Routes:
Network Destination Netmask Gateway Interface Metric 25 20 20 20 1 25 25 25 25 20 25 1 1
Default Gateway:

Report •

April 6, 2009 at 08:08:35
For those interested.. My buddy and I resolved the problem this evening.. It turns out that I didn't have a route back into my network (from the DSL router and the A/P), hence any traffic initiated from the network to the network or beyond (internet) couldn't get back to ...

Certainly a brain-boiler, but a damn good excersize to have gone through.

Report •

Related Solutions

Ask Question