Computing.Net > Forums > Networking > Router to Access Point (plz help)

Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.

Router to Access Point (plz help)

Reply to Message Icon

Name: Offspring20999
Date: September 30, 2006 at 13:00:56 Pacific
OS: Windows XP Pro
CPU/Ram: 1200/256SDRAM
Comment:

Hello,
I just got a new router that I want to convert to an access point on the other side of my house. So I took an eithernet cable coming from the old router and pluged it into one of the ports(1-4), not wan port, in my new router. This way, everything from the new access point will stay on the same subnet. I connected to the new router via eithernet on a PC, and I'm getting an IP, everything is great.

My question is how do I get to my new router. Because I would like to turn the wireless on also. If I go to 192.168.0.1 that just takes me to my old router.

Thank You for your time.



Sponsored Link
Ads by Google

Response Number 1
Name: Richard59
Date: September 30, 2006 at 15:23:44 Pacific
Reply:

I would suggest disconnect the router-router cable. Direct connect to the new router and log into it's admin page. Disable DHCP. Turn on the wireless. Set your security. ( I suggest not using 64bit WEP as mine was set that way and it took a hacker about 10 minutes to breech it two nights ago)

Once you have it set up, re-connect the router-router cable and see if the wireless will obtain and distribute IPs from the original router.

I used to have a signature but it disappeared and I just couldn't be bothered writing another so please feel free to ingore this.


0

Response Number 2
Name: Offspring20999
Date: September 30, 2006 at 15:58:59 Pacific
Reply:

Thank you I will try that.


0

Response Number 3
Name: steigrafx
Date: September 30, 2006 at 19:40:04 Pacific
Reply:

Richard59, I'm curious. I don't bother with encryption but rely solely on MAC filtering. Were you using MAC filtering, as well, and did the intruder spoof your MAC address?


0

Response Number 4
Name: cmw2010
Date: October 1, 2006 at 07:52:29 Pacific
Reply:

Don't forget to change the the IP address of the access point to 192.168.0.2


0

Response Number 5
Name: heropsycho2177
Date: October 2, 2006 at 00:10:09 Pacific
Reply:

steigrafx,

Remember that pretty much any single thing you do to thwart hackers from getting into your wifi will eliminate the vast majority of intruders.

95% of potential intruders don't know how to get around MAC address filtering.

But 5% do, and those 5% are the ones you should worry about.

Any encryption requires capturing traffic, and subsequently analyzing it to crack a key. 64-bit encryption is easy to crack, and ANY WEP encryption is far too easy as well. An intruder with the right tools can crack ANY WEP key in five minutes or less.

128-bit (or stronger) WPA encryption is the way to go. If you want true protection, do it!

"How many squirrels had to die to make you look fly?!"


0

Related Posts

See More



Response Number 6
Name: steigrafx
Date: October 2, 2006 at 15:34:15 Pacific
Reply:

Thanks for the reply, heropsycho. Fortunately for me, I live in a residential suburban neighborhood with half-acre plots. I'm not very concerned about hackers, just keeping the neighbors from accidentally connecting to my network. I would certainly use higher levels of security if I was in an urban environment.

Thanks again.

ASUS A8N32-SLI Deluxe
AMD Athlon X2 4800+
2GB RAM, X1900GT
2x37GB WD Raptors, RAID 1
1x250GB WD Storage


0

Response Number 7
Name: heropsycho2177
Date: October 2, 2006 at 17:05:29 Pacific
Reply:

Encryption takes a few minutes to setup. Without encryption, potential intruders can not only eavesdrop, but they can also break into your wifi network, plant keystroke loggers to capture credit card numbers, account info, whatever.

Living in a suburban neighborhood doesn't shield you. Wardrivers use stuff like high gain antennas to thwart any defense of isolation.

Compare minutes to setup encryption vs. the time it would take to correct one instance of credit card fraud.

Do as you will, but really think about the implications of not securing your wifi properly.

Please help survivors of Hurricane Katrina!

www.redcross.org


0

Response Number 8
Name: steigrafx
Date: October 3, 2006 at 10:16:56 Pacific
Reply:

I know you're right, and I'm going to add encryption to my wireless. Thanks for taking the time, I appreciate it.

Kevin

ASUS A8N32-SLI Deluxe
AMD Athlon X2 4800+
2GB RAM, X1900GT
2x37GB WD Raptors, RAID 1
1x250GB WD Storage


0

Response Number 9
Name: heropsycho2177
Date: October 3, 2006 at 10:39:18 Pacific
Reply:

Don't forget...

*in best caveman voice*

WEP bad!

WPA good!

Please help survivors of Hurricane Katrina!

www.redcross.org


0

Sponsored Link
Ads by Google
Reply to Message Icon

To Configure Internet Cam... WLAN Connection Problems



Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.


Go to Networking Forum Home


Sponsored links

Ads by Google


Results for: Router to Access Point (plz help)

wireless router to access point? www.computing.net/answers/networking/wireless-router-to-access-point/27768.html

DI-524 router to access point? www.computing.net/answers/networking/di524-router-to-access-point/28034.html

help with setting up router as access point www.computing.net/answers/networking/help-with-setting-up-router-as-access-point/37803.html