Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
We started having problems with replication between our two Domain Controllers this past Monday. We had to shutdown one of the Domain Controllers and because of a bad CMOS battery, it came back up showing the wrong time.
The DCDIAG results are attached.
This is a WIndows 2000 mixed domain (although both Domain Controllers are WIndows 2000). Results of DCDiag on DC that was not shutdown/wrong time:
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Replications
[Replications Check,DC2] A recent replication attempt failed:
From DC1 to DC2
Naming Context: CN=Schema,CN=Configuration,DC=tpsntdomain,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2008-01-16 16:50.41.
The last success occurred at 2008-01-14 12:45.43.
52 failures have occurred since the last success.
[DC1] DsBind() failed with error -2146893022,
The target principal name is incorrect..
[Replications Check,DC2] A recent replication attempt failed:
From DC1 to DC2
Naming Context: CN=Configuration,DC=tpsntdomain,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2008-01-16 17:19.25.
The last success occurred at 2008-01-14 13:03.55.
482 failures have occurred since the last success.
[Replications Check,DC2] A recent replication attempt failed:
From DC1 to DC2
Naming Context: DC=tpsntdomain,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2008-01-16 17:20.41.
The last success occurred at 2008-01-14 13:28.40.
369 failures have occurred since the last success.
......................... DC2 passed test Replications
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
......................... DC2 passed test NetLogons
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: KnowsOfRoleHolders
Warning: DC1 is the Schema Owner, but is not responding to DS RPC Bind.
[DC1] LDAP bind failed with error 31,
A device attached to the system is not functioning..
Warning: DC1 is the Schema Owner, but is not responding to LDAP Bind.
Warning: DC1 is the Domain Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Domain Owner, but is not responding to LDAP Bind.
Warning: DC1 is the PDC Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the PDC Owner, but is not responding to LDAP Bind.
Warning: DC1 is the Rid Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Rid Owner, but is not responding to LDAP Bind.
Warning: DC1 is the Infrastructure Update Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Infrastructure Update Owner, but is not responding to LDAP Bind.
......................... DC2 failed test KnowsOfRoleHolders
Starting test: RidManager
[DC2] DsBindWithCred() failed with error -2146893022. The target principal name is incorrect.
......................... DC2 failed test RidManager
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: Services
......................... DC2 passed test Services
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: frssysvol
There are errors after the SYSVOL has been shared.
The SYSVOL can prevent the AD from starting.
......................... DC2 passed test frssysvol
Starting test: kccevent
An Warning Event occured. EventID: 0x80000632
Time Generated: 01/16/2008 17:20:41
(Event String could not be retrieved)
......................... DC2 failed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0xC0040011
Time Generated: 01/16/2008 17:17:15
Event String: RSM cannot manage library PhysicalDrive1. It
......................... DC2 failed test systemlog
Running enterprise tests on : tpsntdomain.com
Starting test: Intersite
......................... tpsntdomain.com passed test Intersite
Starting test: FsmoCheck
......................... tpsntdomain.com passed test FsmoCheck
Would appreciate help with this problem.

![]() |
![]() |
![]() |

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |