How can i enable TCP/IP support to remoteboot workstations?

To Enable TCP/IP Support Edit the \Rpl\Bblock\NetBEUI\Adapter\Dosbb.cnf file, where adapter is the name of the network adapter. Remove the semicolon (;) in column one of the following line: ;DRV BBLOCK\TCPDRV.DOS /I:C:\LANMAN.DOS ~ ~ For each profile (or personal copy of a profile) that will support TCP/IP, edit the following files as described: In \Rpl\RplFiles\Profiles\\Autoexec.bat, where Profile is the name of the profile, enable the following entries by removing the REM designations at the beginnings of those lines. UMB.COM NMSTR LOAD TCPIP In \Rpl\RplFiles\Profiles\\Config.sys, where Profile is the name of the profile, enable Nemm.dos by removing the REM designation at the beginning of that line. Start a client using one of the profiles altered in the last step. The client will now load TCP/IP when started from the RPL Server. I hope this helps. not just you but others outthere in you situation.

how to Remote boot Windows 2000 Profesional