Pix Firewall VPN Issue
|
Original Message
|
Name: bear86
Date: March 20, 2004 at 18:46:48 Pacific
Subject: Pix Firewall VPN Issue
OS: PIX
CPU/Ram: N/A
|
Comment: I am running a Cisco Pix 507 firewall. I have set up a VPN using PPTP to allow our users to access documents and email from home. I have the VPN working in that I can connect and access workstations inside of the network. The problem is that when I am connected to the VPN I am not able to access the internet or the email server which is located outside of the firewall. Here are some of the commands I enabled on the firewall: -access-list nonat permit ip host 172.16.10.14 192.168.10.0 255.255.255.0
-nat (inside) 0 access-list nonat
-nat (inside) 1 0.0.0.0 0.0.0.0
-ip local pool pptp-pool 192.168.10.1-192.168.10.10
-sysopt connection permit-pptp
-vpdn group 1 accept dialin pptp
-vpdn group 1 client configuration address local pptp-pool
-vpdn group 1 clien configuration dns 172.16.10.3
-vpdn group 1 pptp echo 60
-vpdn username xxxxx password xxxxx
-vpdn enable outside Can anyone tell me what I might be missing, or another way to set it up so that I can have internet access throught the VPN.
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Danny Larouche
Date: March 20, 2004 at 20:18:41 Pacific
Subject: Pix Firewall VPN Issue |
Reply: (edit)This problem is not caused by the Pix, but the Microsoft vpn client. You should use a real vpn client that support Ipsec protocol. The Microsoft's vpn client route all trafic over the tunnel ignoring the default routing table.
Danny
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: bear86
Date: March 28, 2004 at 20:35:58 Pacific
Subject: Pix Firewall VPN Issue
|
Reply: (edit)I configured ipsec as well and I have the same problem.
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
