Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Network boot disk with ghost
Name: Dsfm Date: April 12, 2004 at 20:45:17 Pacific OS: NA CPU/Ram: NA
Comment:
I'm trying to create a ghost network boot disk with the SMC EZ CardBus-II 10/100 PC Card, so I can do imaging. But what happen is that I got a "could not establish connection with ghost TCP/IP slave 1633" message.I tried a different computer with a a built in NIC card and I don't have that message. I think its the SMC EZ card that wasn't set up correctly. Can some help me out. I'm going crazy trying to figure this out.
The config.sys setting is:
DEVICE=SMCOPEN.exe DEVICE=\net\protman.dos /I:\net DEVICE=\net\dis_pkt.dos DEVICE=\net\SMCEZ2.dos LASTDRIVE = Z
The autoexe.bat setting is:
@echo off SET TZ=GHO+05:00 prompt $p$g \net\netbind.com MOUSE.COM echo Loading... CD GHOST GHOST.EXE
Name: Curt R Date: April 13, 2004 at 04:47:33 Pacific
Reply:
Try downloading a network bootdisk from www.bootdisk.com and just add the ghost.exe to the disk after you've created it. Then once you're booted, just run ghost.
Or, if there isn't room on that floppy for ghost, put it on another and once booted, change disks to the ghost disk and run it.
0
Response Number 2
Name: Dsfm Date: April 13, 2004 at 17:19:50 Pacific
Reply:
Thanks for the advice. I read some of the tutorial and made my own network boot. I don't get that message anymore. But another problem exist. Now I got the "TCP/IP sending data Fail" from ghost. Any one know why I got this error?
Summary: I have a norton ghost boot disk but my problem is that the image I want to dump is located on the server. We used to have a network boot disk but we lost it somewhere. I think what I need, if I'm not...
Summary: Hi there, I am trying to create a network boot disk with a 3com 3c589c network card, using the Network client administrator under NT server. I have created the disk and edited protocol and system.in...
Summary: I use MS network client 3.0 to make a network boot disk with the drivers in NDIS2 of the network card. However, when booting to the line of a:\net\net start, it prompt me there is an error of not enou...
0 
