I am getting "Cable disconnected" and can't connect to my network via my Netgear wireless card. I have an ethernet adapter on the PC as well which is working. See below for my setup. Basically PC 1 & 2 have wireless NICs.PC 2 also has an eth. adapter. PC 2 & 3 are connected via eth. /thru 100mb switch. ipconfig /all on PC 1 returns the ip.can ping that ip.192.168.0.2 ipconfig /all on PC2 shows the ip for the eth. card but cable disconnected for the wirelss card. I can ping both ips on that machine.Cannot ping PC 1 via wireless card. I can connect/ping PC 2 via eth. cable connection from a laptop. The wireless card is enabled in Device manager. I have tried: Disabling the eth. card. Reinstalling the netgear driver/removing card and replacing with 2nd netgear card. Moved card to different slot. I am trying to connect in adhoc mode.(Don't have an access point) PC 2 is running Win2K server (SP 3) DNS / IIS 5.0 (I have a website on it and can connect to it over eth. connection) The wireless card light on PC2 is going. I have a common SSID name for both wireless machines. No WEP enabled. Signal is 100% All machines have static ip's and 255.255.255.0 subnet.No firewalls. PC 1 :192.168.0.2 Netgear WG311v2 Wireless adapter PCI Win2K Pro PC 2 :192.168.0.3 Ethernet adapter Win2K Server :192.168.0.4 Netgear WG311v2 Wireless adapter PCI PC 3 :192.168.0.7 Laptop Ethernet adapter Win2K Pro I can't resolve this ... maybe a driver issue ?any help would be appreciated...